Inflatable Air Mat Instructions

Inflation: For all inflation methods, open just the first layer cap of the valve. The air mat can be inflated in three ways:

  • Mouth Inflation: Open the cap and blow into the valve for manual inflation.
  • Pump Sack Inflation: Attach the included pump sack to the valve, fill the sack with air, and compress it to transfer air into the mat.
  • Electronic Pump: Use a compatible electronic pump with the valve for fast, effortless inflation.

Avoid over-inflating, as this may place stress on the seams.

Deflation: The double valve system allows controlled deflation:

  • Comfort Adjustment: Press the inner valve to release small amounts of air for comfort adjustment.
  • Full Deflation: Pull out the entire valve to completely deflate the mat.

Surface Check: Before placing your mat on the ground, remove or avoid sharp objects, such as rocks, sticks, or debris, that could puncture or damage the mat’s fabric.

Cleaning: Ensure the valve is fully closed to prevent water from entering. Use a damp cloth or sponge to gently wipe the surface clean, avoiding excess water. For tougher spots, apply a small amount of mild soap to the cloth, then wipe clean. Avoid solvents, harsh chemicals, bleach, or abrasive materials as this could damage the TPU.

Drying: Allow to air dry fully before storage. Do not tumble dry. Avoid excessive exposure to sunlight to prevent material degradation.

Storage: Store in a dry area at room temperature, away from pets and sharp objects. For best results store the mat unrolled/flat with the valve open, which helps prevent moisture from becoming trapped inside.

Trapped moisture can lead to mould formation and affect the mat’s thermal properties, so ensuring a dry environment is essential.

Repairs: For small punctures, use TPU-compatible repair patches (one included).

Proper care will extend the life of your air mat.